How to program a Meduino Pro Mini with FTDI / USB Adapter

Meduino-pro-mini-programmed-with-FTDI-USB
Meduino-pro-mini-programmed-with-FTDI-USB

Hi there, have this Meduino Pro Mini, an Arduino clone that misses the usb port in favour of an FTDI port , an I2C bus, and all normal pins you could expect and find on any small-duino. This one lefts apart the usb port: actually an onboard USB port (and relative adapter like Arduino Uno) should be used ideally just once, in order to upload the code, or in rare other occasions like interfacing it with a Raspberry pi without using the gpio bus, and similar occasions. This said, let’s look closer this board and please, forgive my soldering skills while you look at the image. Continue reading “How to program a Meduino Pro Mini with FTDI / USB Adapter”

(Visited 5,246 times, 1 visits today)

How To Program a Meduino Pro Mini using an Arduino Uno as usb-serial adapter

This image shows how to wire Arduino Uno and Meduino Pro mini in order to ulpoad sketches to Meduino pro mini using Arduino uno as USB-Serial Adapter
Arduino Uno as Serial port for Meduino Pro Mini

This little article covers the steps needed in order to use an arduino Uno board as USB-Serial adapter for Meduino Pro Mini, another well done Arduclone. Continue reading “How To Program a Meduino Pro Mini using an Arduino Uno as usb-serial adapter”

Incoming search terms:

  • meduino (27)
  • programming arduino pro mini with uno (18)
  • arduino pro mini (15)
  • meduino pro mini (12)
  • cara program arduino pro mini dengan arduino uno (2)
  • cara masukan prigram arduino ke promini (1)
(Visited 7,307 times, 1 visits today)

[ITA] Multiwii MWC 10DOF cinese (aka GY-80) e Arduino: connessioni e test iniziali

Ho deciso di tradurre questo articolo in italiano poiché ho notato che molti dei lettori sono per l’ appunto, italiani.
Ho ricevuto la mia nuova i2c sensors breakout board

Questa è quello che nella configurazione del software MultiWii viene chiamato GY_80 o GY-80.
Non sembra essere indicato il marchio del produttore o il modello / seriale. Quello che si conosce sono i nomi dei singoli componenti utilizzati per questa scheda Continue reading “[ITA] Multiwii MWC 10DOF cinese (aka GY-80) e Arduino: connessioni e test iniziali”

Incoming search terms:

  • gy-80 (29)
  • gy 80 (18)
  • giroscopi i2c e arduino (12)
(Visited 11,777 times, 1 visits today)

How To Program a Meduino Pro Mini using an Arduino Uno as usb-serial adapter

This image shows how to wire Arduino Uno and Meduino Pro mini in order to ulpoad sketches to Meduino pro mini using Arduino uno as USB-Serial Adapter
Arduino Uno as Serial port for Meduino Pro Mini

This little article covers the steps needed to use an arduino Uno board as USB-Serial adapter for Meduino Pro Mini, another well done Arduclone. Continue reading “How To Program a Meduino Pro Mini using an Arduino Uno as usb-serial adapter”

Incoming search terms:

  • minijava internal error (16)
(Visited 1,673 times, 1 visits today)

Multiwii MWC, Chinese 10DOF (codename GY-80) and Arduino Nano V.3: hooking and testing

 

This image shows how to connect the pro-mini to the gy-80Well, i just received my i2c sensors breakout board

Here it is what the Multiwii software configuration calls GY_80 or GY-80.
There is no brand, no model, no serial.
We know something just about single main components/chip: Continue reading “Multiwii MWC, Chinese 10DOF (codename GY-80) and Arduino Nano V.3: hooking and testing”

Incoming search terms:

  • gy-80 arduino (79)
  • gy-80 arduino code (31)
  • MultiwiiMWC Chinese10DOF(codenameGY-80)andArduinoNanoV 3:hookingandtesting|GiuseppeUrsoBlog (25)
  • gy-80 schematic (24)
  • gy-80 imu (17)
  • gy80 (13)
  • gy-80 and arduino (10)
  • multiwii baro imu (3)
  • arduino nano v3 multiwii airplane (1)
(Visited 19,521 times, 1 visits today)