My latest crash under the snow

Here you are my latest crash during a heavy snowing.

I had some damages: one motor with bended shaft, an arm of the Q450 was slightly broken and rubber band philosophy always wins. In fact thanks to the rubber bands both the cameras simply detatched from the platform falling on theur own weight, avoiding sustaining the entire platform weight, as at the opposite, the poor motor #4 did. Continue reading “My latest crash under the snow”

Incoming search terms:

  • @mwc com sa (22)
  • mail learnway net (18)
  • 12UR (1)
(Visited 1,506 times, 1 visits today)

How to program a Meduino Pro Mini with FTDI / USB Adapter

Meduino-pro-mini-programmed-with-FTDI-USB
Meduino-pro-mini-programmed-with-FTDI-USB

Hi there, have this Meduino Pro Mini, an Arduino clone that misses the usb port in favour of an FTDI port , an I2C bus, and all normal pins you could expect and find on any small-duino. This one lefts apart the usb port: actually an onboard USB port (and relative adapter like Arduino Uno) should be used ideally just once, in order to upload the code, or in rare other occasions like interfacing it with a Raspberry pi without using the gpio bus, and similar occasions. This said, let’s look closer this board and please, forgive my soldering skills while you look at the image. Continue reading “How to program a Meduino Pro Mini with FTDI / USB Adapter”

(Visited 5,246 times, 1 visits today)

How To Program a Meduino Pro Mini using an Arduino Uno as usb-serial adapter

This image shows how to wire Arduino Uno and Meduino Pro mini in order to ulpoad sketches to Meduino pro mini using Arduino uno as USB-Serial Adapter
Arduino Uno as Serial port for Meduino Pro Mini

This little article covers the steps needed in order to use an arduino Uno board as USB-Serial adapter for Meduino Pro Mini, another well done Arduclone. Continue reading “How To Program a Meduino Pro Mini using an Arduino Uno as usb-serial adapter”

Incoming search terms:

  • meduino (27)
  • programming arduino pro mini with uno (18)
  • arduino pro mini (15)
  • meduino pro mini (12)
  • cara program arduino pro mini dengan arduino uno (2)
  • cara masukan prigram arduino ke promini (1)
(Visited 7,307 times, 1 visits today)

[ITA] Multiwii MWC 10DOF cinese (aka GY-80) e Arduino: connessioni e test iniziali

Ho deciso di tradurre questo articolo in italiano poiché ho notato che molti dei lettori sono per l’ appunto, italiani.
Ho ricevuto la mia nuova i2c sensors breakout board

Questa è quello che nella configurazione del software MultiWii viene chiamato GY_80 o GY-80.
Non sembra essere indicato il marchio del produttore o il modello / seriale. Quello che si conosce sono i nomi dei singoli componenti utilizzati per questa scheda Continue reading “[ITA] Multiwii MWC 10DOF cinese (aka GY-80) e Arduino: connessioni e test iniziali”

Incoming search terms:

  • gy-80 (29)
  • gy 80 (18)
  • giroscopi i2c e arduino (12)
(Visited 11,777 times, 1 visits today)

Client side Html Injection with firebug

As described in another article, you can use Client side html injection techniques basically for two reasons:

  • cheat on your friends
  • send variables

In this example we will send some vars to a php page predisposed in order to show all POST vars, then we will apply this technique to the ebay homepage to apply a filter to the search form.
Continue reading “Client side Html Injection with firebug”

Incoming search terms:

  • psquiza o feihebuger (10)
(Visited 4,685 times, 1 visits today)

Low altitude hold, auto takeoff, autolanding with kk or Hk v2.1 + Arduino + Sonar

This post is under constant update until i find a complete solution

I’m publishing it even if it is not complete because i’ve found some working (into compiler) code and probably there are a lot of people out there in my same situation and we can help each other. So…

UPDATES 2012-12-06

  • I made all connections
  • Reviewed the code and renamed vars so you can actually understand while you read
  • I compiled and uploaded the sketch (the first one has errors)
  • I added an LED for signaling the status changes
  • I’m working on thelemetry (battery voltage)
  • I switched to a new ping library
  • I released new code
  • I updated this discussion about arduino + sonar/ping + kk/hk board
  • It works with any configuration (tricopter, Y4, Y6, xcopter, quadcopter, hexcopter, octocopter, 12 rotors and so…)

Continue reading “Low altitude hold, auto takeoff, autolanding with kk or Hk v2.1 + Arduino + Sonar”

Incoming search terms:

  • how to make altitude hold flight controller kk 2 1 5 (1)
  • setup connection ultrasonic sensor with kk board (1)
(Visited 10,025 times, 1 visits today)

Shineisp Installation Log / mini How to

Shineisp is an italian open source WHM (Web Hosing Management) and we are going to give it a try. I recall i alredy installed it last year, but the machine had a poor hardware and shineisp is a greedy MVC phpmysql program. For this “instalfiguration” we assume we are on Debian Squeeze and we will cover the steps needed to get shineisp up and running in 10 minutes.

Continue reading “Shineisp Installation Log / mini How to”

(Visited 2,294 times, 1 visits today)

How To Program a Meduino Pro Mini using an Arduino Uno as usb-serial adapter

This image shows how to wire Arduino Uno and Meduino Pro mini in order to ulpoad sketches to Meduino pro mini using Arduino uno as USB-Serial Adapter
Arduino Uno as Serial port for Meduino Pro Mini

This little article covers the steps needed to use an arduino Uno board as USB-Serial adapter for Meduino Pro Mini, another well done Arduclone. Continue reading “How To Program a Meduino Pro Mini using an Arduino Uno as usb-serial adapter”

Incoming search terms:

  • minijava internal error (16)
(Visited 1,673 times, 1 visits today)

Multiwii MWC, Chinese 10DOF (codename GY-80) and Arduino Nano V.3: hooking and testing

 

This image shows how to connect the pro-mini to the gy-80Well, i just received my i2c sensors breakout board

Here it is what the Multiwii software configuration calls GY_80 or GY-80.
There is no brand, no model, no serial.
We know something just about single main components/chip: Continue reading “Multiwii MWC, Chinese 10DOF (codename GY-80) and Arduino Nano V.3: hooking and testing”

Incoming search terms:

  • gy-80 arduino (79)
  • gy-80 arduino code (31)
  • MultiwiiMWC Chinese10DOF(codenameGY-80)andArduinoNanoV 3:hookingandtesting|GiuseppeUrsoBlog (25)
  • gy-80 schematic (24)
  • gy-80 imu (17)
  • gy80 (13)
  • gy-80 and arduino (10)
  • multiwii baro imu (3)
  • arduino nano v3 multiwii airplane (1)
(Visited 19,521 times, 1 visits today)